The difference between imported bearings and domestic bearings

With the advent of the international tide, domestic bearing code gradually with imported bearing code, the latest publication of national standards show that the domestic code and international ISO standards are basically consistent.

2019-12-18

Requirements for Cleaning, Inspection and Insulating Backing Plate of Bearing Housing of Large Motors

Large motor bearings are packed and transported separately. After unpacking, the upper and lower tiles are taken out and marked with lifting ring screws and cleaned with kerosene. Dry with dry cloth and check whether all grooves are clean, whether there is residual sand from casting, the tungsten gold layer is not well combined with the tile body, and the marked channels and cracks have sand holes and other impurities, etc.). If it cannot be repaired, it is necessary to re-hang tungsten gold.

2019-12-18

What are the main causes and types of mechanical accidents?

Damage caused by the rotation of mechanical equipment parts and components. For example, gears, pulleys, pulleys, chucks, shafts, light bars, lead screws, shaft joints and other parts and components in machinery and equipment are all rotating. The main forms of personnel injury caused by rotating motion are strangulation and object impact injury.

2019-12-18

The importance of working position in mechanical operation

The safety of mechanical operation has always been the top priority of mechanical operation, and it is very important to master the working position of mechanical operation. When determining the design of the operator's working area on the machine, consider the safety and reliability of the man-machine system, reasonably arrange the parts (including various displays, manipulators, illuminators) directly operated or used by people on the mechanical equipment, and create good conditions such as working space, working chair and working surface related to the working posture of people, so as to prevent fatigue and accidents.

2019-12-18

The difference between imported bearings and domestic bearings

2019-12-05

The importance of working position in mechanical operation

Abstract: The safety of mechanical operation has always been the top priority of mechanical operation, and it is very important to master the working position of mechanical operation. When determining the design of the operator's working area on the machine, consider the safety and reliability of the man-machine system, reasonably arrange the parts (including various displays, manipulators, illuminators) directly operated or used by people on the mechanical equipment, and create good conditions such as working space, working chair and working surface related to the working posture of people, so as to prevent fatigue and accidents.

2019-12-05

< 1 > proceed page